Plant Stand setup instructions
Click on your product image below
to navigate to the corresponding instructions.
Japandi Plant Stand
Japandi Tiered Plant Stand
Japandi Corner Plant Stand
Japandi Hanging Plant Stand
Japandi Plant Chandelier
Japandi Plant Stand
Please Note: The legs have been designed to be a tight fit, which means it might require a little bit of patience to get them in. However, once they are in, they will form the basis of a very strong and sturdy plant stand.
In the box: One plate and three legs of your specified height.
Place plate on the corner edge of a table. Use your palm to hold it in place.
Use your other hand to firmly insert the leg. Wriggle the leg backward and forward repeatedly, applying downward pressure until it is all the way in.
Place plate on the corner edge of a table. Use your palm to hold it in place.
Use your other hand to firmly insert the leg. Wriggle the leg backward and forward repeatedly, applying downward pressure until it is all the way in.
Your Japandi Plant Stand is now ready to go.
For customer service support, please email: sales@workfromhomedesks.co.nz
Japandi Tiered Plant Stand
Weight rating: 25lbs top plate, 100lbs bottom plate.
In the box: Two plates, two frame pieces.
Take the two frame pieces and slot them together at a cross angle
Place the plate pieces (biggest on bottom and smallest on top) on each of the cross-sections, making sure they slot onto the frame and fit securely.
Your Japandi Plant Stand is now ready to go.
For customer service support, please email: sales@workfromhomedesks.co.nz
Japandi Corner Plant Stand
Weight rating: 100lbs bottom plate 25lbs middle plate 20lbs top plate
In the box: Three plates, two frame pieces.
Take the two frame pieces and slot them together at a cross angle
Place the plate pieces (biggest on bottom, medium size in the middle and smallest on top) on each of the cross-sections, making sure they slot onto the frame and fit securely.
Your Japandi Corner Plant Stand is now ready to go.
For customer service support, please email: sales@workfromhomedesks.co.nz
Japandi Hanging Plant Stand
Please Note: The Japandi Hanging Plant Stand must be correctly installed. Failure to do so may risk the structure falling down.
Weight rating: 15lbs
In the box: One plate, two frame pieces,one length of cord, one carabiner, one coach screw eye hook.
Take the two frame pieces and slot them together at a cross angle
Place the plate piece on the bottom cross-section, making sure it slots onto the frame and fits securely.
Using the length of cord provided, thread it through the two holes located at the top of the hanging plant stand.
Tie a non-slip knot (e.g. reef knot) to create a loop. The size of this loop will indicate your desired height, so you can adjust accordingly.You may also like to tie knots at the end of each side of the cord to avoid the main knot from slipping and the cord from fraying.
Install the provided coach screw eye hook into a ceiling stud.Use the carabiner to connectthe cord to the coach screw eye hook.
Your Japandi Plant Stand is now ready to go.
For customer service support, please email: sales@workfromhomedesks.co.nz
Japandi Plant Chandelier
Please Note: The plant chandelier must be correctly installed. Failure to do so may risk the structure falling down.Make sure you suspend the plant chandelier from hooks that have been correctly installed into ceiling studs.
Weight rating: 45 lbs.
In the box: One plant chandelier, two lengths of cord, two carabiners, two coach screw eye hooks.
Using one of the lengths of cord provided, thread each end through the two outer holes located at both corners on the shortest width of the chandelier.
Tie a non-slip knot (e.g. reef knot) to create a loop. The size of this loop will indicate your desired height, so you can adjust accordingly.
You may also like to tie knots at the end of each side of the cord to avoid the main knot from slipping and the cord from fraying.
Install the provided coach screw eye hooks into studs in the ceiling.
Use the two carabiners to connect each of the tied pieces of cord to the coach screw eye hooks.
Your Japandi Plant Chandelier is now ready to go.
For customer service support, please email: sales@workfromhomedesks.co.nz